05
апр
Radio Shack Pro 62 Owners Manual Rating: 9,5/10 504 reviews
• 20-136 PRO-136 Desktop Radio Scanner Thank you for purchasing your 200 Channel Desktop Radio Scanner from RadioShack. Please read this user’s guide before installing, setting up and using your new scanner. What’s Included Scanner AC adapter Antenna User’s guide Preprogrammed frequency list Quick start guide www.radioshack.com. • ontents Scanner Setup.4 Scanner Features..4 Connecting the Antenna..6 Powering Your Scanner..6 Installing Batteries..6 Battery Notes..7 Recycle Rechargeable Batteries.7 Scanner Placement..7 Connecting Headphones.8 Listening Safely..8 Connecting the External Alert Out.8 Understanding Your Scanner.8 Turning on the Scanner..9 Setting the Clock/Alarm..9 Alarm Function..
• Contents Receiving NWR-SAME and Weather Alert Signals.16 Turning On the Digital Weather Alert Feature. 16 Receiving Alerts in Standby Mode.17 Testing the Weather Alarm.17.17 Programming FIPS.17 Skywarn..18 About Skywarn..19 Settings.20 Setting Delay.. • Scanner Setup Scanner Setup Scanner Features Select a service band: MAR (Marine), FD/PD (Fire/Police), AIR (Aircraft), HAM, or FM. Start a weather scan. Press and hold to activate Skywarn. • DELAY ENT (Enter) PROGRAM Enter a decimal point.
Here you will find instruction manuals, service manuals, user guides schematic, brochures etc. This is the manuals page for Radio Shack. In this page. FRS-106 Manual.zip, 62 Kbytes. PRO-2006 Manual and schematic.zip, 1.850 Kbytes. Radio Shack Manuals. Looking for an old, out-of-print Radio Shack manual? You've come to the right place.
Complete the entry of frequencies. Clear an entry. • Scanner Setup PRI (Priority) WX ALERT Turns the priority function on or off. Press to turn weather alert on and off. Lockout selected channels or skip specified frequencies during a search. PSE (Pause) Stop and resume search or scan. Press to turn the backlight on for 15 seconds.
Input a number. • Scanner Setup Connecting the Antenna Attach the supplied antenna to the scanner by aligning the arrow on its base with the tab on the scanner’s BNC connector and then pressing into place. When using an external antenna, always connect with 50-ohm, RG-58, or RG-8 coaxial cable. 
• Scanner Setup Battery Notes • Use fresh alkaline AA batteries. • Rechargeable batteries can be used, but battery life is shorter than with alkaline batteries. The scanner will not recharge batteries in the compartment.
• Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits. • Scanner Setup Connecting Headphones For private listening, you can plug a mono earphone or headset into the Headphone Jack on the back of your scanner. This automatically disconnects the internal speaker. Note that the sound is not in stereo. Listening Safely To protect your hearing, follow these earphone or headphones guidelines: •.
Project management principles and practices. • Scanner Setup Besides searching within a selected frequency range, you can also search your scanner’s service banks. Service banks are preset groups of frequencies categorized by the type of services that use those frequencies. The scanner is preprogrammed with all the frequencies allocated to the Marine, Aircraft, Police (Fire/Emergency), Ham and FM services. • Scanner Setup 2. The hour digits flash. Press or press the number keys to enter the hour. Then press ENT/PROGRAM to set.
The minutes digits flash. Press or press the number keys to enter the minutes. Press ENT/PROGRAM to set. Note: When setting the clock minutes, the seconds digits are reset to 00 to enable accurate time adjustment. • Scanner Setup BANK 1 Example shows entering bank 1 channel 00. Note: If you entered an invalid bank or channel number, Error appears and the scanner beeps.
Enter a valid bank or channel. Use the number keys to enter the frequency, pressing • /CLR/DELAY for the decimal point. • Searching Searching Use the search function to find active frequencies. While doing a fine tune or service bank search, press •/CLR/DELAY to turn the 2-second delay on or off. Fine Tune You can search up or down from the currently displayed frequency using a fine tune search. • Searching Storing Frequencies Found During a Search To store frequencies you find in a fine tune or service bank search: 1. Press PSE at the frequency you want to store.
Press ENT/PROGRAM to enter programming mode. The screen flashes, alternating between the smallest empty channel number in the current bank, 000.000, and the frequency you want to store. • Searching 3. L/O disappears. To clear all skipped frequencies at once: 1. While searching, press PSE. Hold down L/O until the scanner beeps twice.
Notes: • If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency. • Scanning Scanning Scanning Stored Channels Press SCAN/MAN to begin scanning your programmed frequencies. SCAN scrolls across the display and the scanner scans through all non-locked channels in the activated banks. Select any combination of banks to scan by pressing the corresponding number keys. • Scanning To stop at a channel while scanning: 1.
• 20-136 PRO-136 Desktop Radio Scanner Thank you for purchasing your 200 Channel Desktop Radio Scanner from RadioShack. Please read this user’s guide before installing, setting up and using your new scanner. What’s Included Scanner AC adapter Antenna User’s guide Preprogrammed frequency list Quick start guide www.radioshack.com. • ontents Scanner Setup.4 Scanner Features..4 Connecting the Antenna..6 Powering Your Scanner..6 Installing Batteries..6 Battery Notes..7 Recycle Rechargeable Batteries.7 Scanner Placement..7 Connecting Headphones.8 Listening Safely..8 Connecting the External Alert Out.8 Understanding Your Scanner.8 Turning on the Scanner..9 Setting the Clock/Alarm..9 Alarm Function..
• Contents Receiving NWR-SAME and Weather Alert Signals.16 Turning On the Digital Weather Alert Feature. 16 Receiving Alerts in Standby Mode.17 Testing the Weather Alarm.17.17 Programming FIPS.17 Skywarn..18 About Skywarn..19 Settings.20 Setting Delay.. • Scanner Setup Scanner Setup Scanner Features Select a service band: MAR (Marine), FD/PD (Fire/Police), AIR (Aircraft), HAM, or FM. Start a weather scan. Press and hold to activate Skywarn. • DELAY ENT (Enter) PROGRAM Enter a decimal point.
Here you will find instruction manuals, service manuals, user guides schematic, brochures etc. This is the manuals page for Radio Shack. In this page. FRS-106 Manual.zip, 62 Kbytes. PRO-2006 Manual and schematic.zip, 1.850 Kbytes. Radio Shack Manuals. Looking for an old, out-of-print Radio Shack manual? You've come to the right place.
Complete the entry of frequencies. Clear an entry. • Scanner Setup PRI (Priority) WX ALERT Turns the priority function on or off. Press to turn weather alert on and off. Lockout selected channels or skip specified frequencies during a search. PSE (Pause) Stop and resume search or scan. Press to turn the backlight on for 15 seconds.
Input a number. • Scanner Setup Connecting the Antenna Attach the supplied antenna to the scanner by aligning the arrow on its base with the tab on the scanner’s BNC connector and then pressing into place. When using an external antenna, always connect with 50-ohm, RG-58, or RG-8 coaxial cable. • Scanner Setup Battery Notes • Use fresh alkaline AA batteries. • Rechargeable batteries can be used, but battery life is shorter than with alkaline batteries. The scanner will not recharge batteries in the compartment.
• Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits. • Scanner Setup Connecting Headphones For private listening, you can plug a mono earphone or headset into the Headphone Jack on the back of your scanner. This automatically disconnects the internal speaker. Note that the sound is not in stereo. Listening Safely To protect your hearing, follow these earphone or headphones guidelines: •.
Project management principles and practices. • Scanner Setup Besides searching within a selected frequency range, you can also search your scanner’s service banks. Service banks are preset groups of frequencies categorized by the type of services that use those frequencies. The scanner is preprogrammed with all the frequencies allocated to the Marine, Aircraft, Police (Fire/Emergency), Ham and FM services. • Scanner Setup 2. The hour digits flash. Press or press the number keys to enter the hour. Then press ENT/PROGRAM to set.
The minutes digits flash. Press or press the number keys to enter the minutes. Press ENT/PROGRAM to set. Note: When setting the clock minutes, the seconds digits are reset to 00 to enable accurate time adjustment. • Scanner Setup BANK 1 Example shows entering bank 1 channel 00. Note: If you entered an invalid bank or channel number, Error appears and the scanner beeps.
Enter a valid bank or channel. Use the number keys to enter the frequency, pressing • /CLR/DELAY for the decimal point. • Searching Searching Use the search function to find active frequencies. While doing a fine tune or service bank search, press •/CLR/DELAY to turn the 2-second delay on or off. Fine Tune You can search up or down from the currently displayed frequency using a fine tune search. • Searching Storing Frequencies Found During a Search To store frequencies you find in a fine tune or service bank search: 1. Press PSE at the frequency you want to store.
Press ENT/PROGRAM to enter programming mode. The screen flashes, alternating between the smallest empty channel number in the current bank, 000.000, and the frequency you want to store. • Searching 3. L/O disappears. To clear all skipped frequencies at once: 1. While searching, press PSE. Hold down L/O until the scanner beeps twice.
Notes: • If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency. • Scanning Scanning Scanning Stored Channels Press SCAN/MAN to begin scanning your programmed frequencies. SCAN scrolls across the display and the scanner scans through all non-locked channels in the activated banks. Select any combination of banks to scan by pressing the corresponding number keys. • Scanning To stop at a channel while scanning: 1.
...">Radio Shack Pro 62 Owners Manual(05.04.2019)• 20-136 PRO-136 Desktop Radio Scanner Thank you for purchasing your 200 Channel Desktop Radio Scanner from RadioShack. Please read this user’s guide before installing, setting up and using your new scanner. What’s Included Scanner AC adapter Antenna User’s guide Preprogrammed frequency list Quick start guide www.radioshack.com. • ontents Scanner Setup.4 Scanner Features..4 Connecting the Antenna..6 Powering Your Scanner..6 Installing Batteries..6 Battery Notes..7 Recycle Rechargeable Batteries.7 Scanner Placement..7 Connecting Headphones.8 Listening Safely..8 Connecting the External Alert Out.8 Understanding Your Scanner.8 Turning on the Scanner..9 Setting the Clock/Alarm..9 Alarm Function..
• Contents Receiving NWR-SAME and Weather Alert Signals.16 Turning On the Digital Weather Alert Feature. 16 Receiving Alerts in Standby Mode.17 Testing the Weather Alarm.17.17 Programming FIPS.17 Skywarn..18 About Skywarn..19 Settings.20 Setting Delay.. • Scanner Setup Scanner Setup Scanner Features Select a service band: MAR (Marine), FD/PD (Fire/Police), AIR (Aircraft), HAM, or FM. Start a weather scan. Press and hold to activate Skywarn. • DELAY ENT (Enter) PROGRAM Enter a decimal point.
Here you will find instruction manuals, service manuals, user guides schematic, brochures etc. This is the manuals page for Radio Shack. In this page. FRS-106 Manual.zip, 62 Kbytes. PRO-2006 Manual and schematic.zip, 1.850 Kbytes. Radio Shack Manuals. Looking for an old, out-of-print Radio Shack manual? You've come to the right place.
Complete the entry of frequencies. Clear an entry. • Scanner Setup PRI (Priority) WX ALERT Turns the priority function on or off. Press to turn weather alert on and off. Lockout selected channels or skip specified frequencies during a search. PSE (Pause) Stop and resume search or scan. Press to turn the backlight on for 15 seconds.
Input a number. • Scanner Setup Connecting the Antenna Attach the supplied antenna to the scanner by aligning the arrow on its base with the tab on the scanner’s BNC connector and then pressing into place. When using an external antenna, always connect with 50-ohm, RG-58, or RG-8 coaxial cable. • Scanner Setup Battery Notes • Use fresh alkaline AA batteries. • Rechargeable batteries can be used, but battery life is shorter than with alkaline batteries. The scanner will not recharge batteries in the compartment.
• Always remove old or weak batteries. Batteries can leak chemicals that destroy electronic circuits. • Scanner Setup Connecting Headphones For private listening, you can plug a mono earphone or headset into the Headphone Jack on the back of your scanner. This automatically disconnects the internal speaker. Note that the sound is not in stereo. Listening Safely To protect your hearing, follow these earphone or headphones guidelines: •.
Project management principles and practices. • Scanner Setup Besides searching within a selected frequency range, you can also search your scanner’s service banks. Service banks are preset groups of frequencies categorized by the type of services that use those frequencies. The scanner is preprogrammed with all the frequencies allocated to the Marine, Aircraft, Police (Fire/Emergency), Ham and FM services. • Scanner Setup 2. The hour digits flash. Press or press the number keys to enter the hour. Then press ENT/PROGRAM to set.
The minutes digits flash. Press or press the number keys to enter the minutes. Press ENT/PROGRAM to set. Note: When setting the clock minutes, the seconds digits are reset to 00 to enable accurate time adjustment. • Scanner Setup BANK 1 Example shows entering bank 1 channel 00. Note: If you entered an invalid bank or channel number, Error appears and the scanner beeps.
Enter a valid bank or channel. Use the number keys to enter the frequency, pressing • /CLR/DELAY for the decimal point. • Searching Searching Use the search function to find active frequencies. While doing a fine tune or service bank search, press •/CLR/DELAY to turn the 2-second delay on or off. Fine Tune You can search up or down from the currently displayed frequency using a fine tune search. • Searching Storing Frequencies Found During a Search To store frequencies you find in a fine tune or service bank search: 1. Press PSE at the frequency you want to store.
Press ENT/PROGRAM to enter programming mode. The screen flashes, alternating between the smallest empty channel number in the current bank, 000.000, and the frequency you want to store. • Searching 3. L/O disappears. To clear all skipped frequencies at once: 1. While searching, press PSE. Hold down L/O until the scanner beeps twice.
Notes: • If you select more than 50 frequencies to skip, each new frequency replaces a frequency previously stored, beginning with the first stored frequency. • Scanning Scanning Scanning Stored Channels Press SCAN/MAN to begin scanning your programmed frequencies. SCAN scrolls across the display and the scanner scans through all non-locked channels in the activated banks. Select any combination of banks to scan by pressing the corresponding number keys. • Scanning To stop at a channel while scanning: 1.
...">Radio Shack Pro 62 Owners Manual(05.04.2019)© 2019 Radio Shack Pro 62 Owners Manual.